Wipeable Pocket Bibs

The inspiration for these comes from a) needing pocket bibs to catch all the food that falls into my son's lap b) wanting said bibs to be cute, yet easily wiped down so that I'm not constantly washing bibs and c) Don't want to pay bookoo bucks for one measily bib!

So, here it is. This bib is oversized...9 inches wide and 13 inches long. Great for little ones who (like mine) manage to get food EVERYWHERE!

------------------------------------------------------------------------------------------------------------------------------------

Supplies

• Fat quarter (18"x22") of LAMINATED cotton (aka oilcloth)
• Fat quarter coordinating cotton (you can also use more laminated cotton for this step, there will be enough in your initial fat quarter)
• Coordinating double fold bias tape
• Coordinating button (or velcro, if you prefer)
• Buttonhole foot (if using button)
• Blue painter's tape (Not Pictured). You will stick this to your presser foot (and possibly the "table" of your machine)
• Bib Pattern:  Print Pattern Here*

*Note...the pattern SHOULD measure 4.5" X 8" on the first page, and 4.5" X 5"/4"on the second. The top of the bib will be slightly wider (to go over the shoulders).

Please check out these Tips for Working with Laminated Fabric before starting this project!

Construction

1) Cut out your pattern pieces. (sorry about the cruddy curves, I had trouble with those). The main panel of the bib (with the dashed bottom edge) needs to be taped to the bottom of the main panel (with the dashed top edge). The pocket is an entity all it's own!


2) Cut 1 Main Panel from the Laminated Fabric, the Contrast Fabric, and the Batting. Cut 2 Pockets from the Laminated Fabric.*

*Note: if you need to change the size of the neck opening, do so. I have made it to fit my 14-month-old son with a little room to spare, but it is easily customizable!

3) Place your Laminated and Contrast fabric wrong sides together, with the batting in between.*

*If you choose to use laminated fabric on both sides, like I did, lay some blue painter's tape on the floor of your sewing machine and on the bottom of the presser foot. It will help to prevent sticking!)

Example of painter's tape on table of machine

Painter's tape on presser foot

4) Place your two pocket pieces wrong sides together, baste in place

I used bobby pins to hold my pieces together. If you choose to
use traditional pins, do so within the seam allowance (approximately
1/4" from edge) since they will leave visible holes

5) Place a section of bias tape along the top edge of the pocket; sew in place.

6) Now line your pocket up on the bottom of the bib (make sure it is on the laminated fabric, not your contrast. Baste in place along sides and bottom edge of the pocket and around the entire bib.

7) Use Bias Tape to finish all edges around bib.*

*Go SLOWLY with the bias tape, especially if you get the narrowest type like I did. I will be the first to tell you that I SUCK at bias tape, and had more than a few areas that I had to redo so that I caught all of the fabric within the narrow strip! If you don't catch all of the fabric, you will get water inside the bib when you wipe it down (or wash it)...and that will leave a brown mark on the laminated cotton. Ick.

8) On one "tab" that will go behind baby's neck, create a button hole with your button hole foot (or place the "rough" velcro on the laminated fabric, I was going to do a button but got lazy and did velcro instead)

9) On other "tab, sew on your button (or sew on the "soft" side of velcro to the contrast fabric side)

All Done! 

Kindle Fire Cover Tutorial

I just recently upgraded to a Kindle Fire from my old Kindle 2. I love it, but I really didn't want to spend $30 or more for a  cover that I *kind of* like. So I thought I would make my own. I wanted something that opened like a book, didn't have elastic everywhere to hold it in place, and that could be secured shut. I also wanted pockets to hold things...a paper here, screen wipe there. Most importantly, I wanted it to be semi-stiff, so that it would offer more protection. Since there are no Fire Cover tutorials yet, I combined features from a couple of regular Kindle cover tutorials and added my own twist as well. The two tutorials I referenced can be found at Skip To My Lou and Dixie Mango.

All seam allowances are 1/4" unless otherwise noted (and, as always, Top Stitching is as close to the edge as possible)
-----------------------------------------------------------------------------------------------------------------------------

Kindle Fire Cover

Supplies

• 1/2 yard Main Fabric
• 1/2 yard Contrast Fabric
• 5/8 yard Fusible Peltex
• 5/8 yard Fusible Fleece
• Small amount 3/4" sewable velcro
• embellishments, if desired (a button for the strap, for example)
• Pressing Cloth
• Matching Thread
• Iron

Construction

Step 1: Cut out your materials

              You will need to make the following cuts. You will end up with 21 pieces.

              From the Main Fabric:

                          -2 cuts 12 1/2" X 9 1/4"

                          -2 cuts 3 1/2" X 9 1/4"

                          -1 cut 2 1/2" X 6"

              From the Contrast Fabric

                          -2 cuts 8 1/4" X 5 5/8"

                          -2 cuts 4 1/2" X 9 1/4"

                          -4 cuts 2" X 2"

                          -1 cut 2 1/2" X 6"

               From the Peltex

                          -4 cuts 8 " X 5 1/2"

               From the Fusible Fleece

                          -1 cut 12 1/2" X 9 1/4"

                          -1 cut 2 1/2" X 6"

               From the velcro

                          -1 cut 1 3/4" long

Step 2: Fuse your pieces

             Fuse the 12 1/2" X 9 1/4" piece of Fleece to one piece of Main Fabric that is the same size. This will be the outside of the cover. 

             Fuse the 2 1/2" X 6" piece of Fleece to the piece of Main Fabric OR  the Contrast Fabric that is the same size. Choose the fabric that you want on the outside of the strap. 

             Fuse 2 pieces of Peltex together. Repeat with the other 2 pieces of Peltex.

Step 3: Prepare your strap.
Attach your piece of velcro to one end of the LINING portion of the strap (the piece that won't show when the cover is closed. I usually attach the "rough" side of the velcro to the strap. With wrong sides together, take the 2 1/2" X 6" pieces of Main and Contrast Fabric (one will have the fleece fused to it) and make sure your raw edges line up. Sew around 3 of the edges, making sure that one of the edges is the one with the velcro. Turn. 

Step 4: Prepare the Kindle "Pocket"

              Fold your 4 2" X 2" squares in half, forming triangles, right side out. Press. If you want, top stitch along the crease. Place them at the corners of your first 8 1/4" X 5 5/8" contrast piece (on the right side of the fabric, with the squared corners of the triangle at the corners of the fabric (see photo). Place second 8 1/4" X 5 5/8" contrast piece on top, right side down, matching raw edges. Pin in place, making sure you keep the triangles in place.

             

Sew around perimeter twice for security, leaving a gap for turning. Clip corners and turn, poking corners out. Turn raw edges in and press...now make sure your Kindle Fire fits!

*Note: I had to sew closer to the edge than the 1/4" seam allowance I use in every other step. It is easier to make the pocket smaller than it is to make it bigger, so start out by stitching fairly close to the outer edge (1/8" if possible) and if you need to sew around further in, you can.
Step 5: Preparing the other "Pockets"
               Take your two 3 1/2" X 9 1/4" Main Fabric pieces and place them right sides together. Stitch along ONE of the long edges. Turn right side out, and press. Topstitch. This edge will be the edge of the pocket that shows (that forms the opening to the pocket). Repeat with the two 4 1/2" X 9 1/4" Contrast Pieces. Place the Main Fabric pocket onto the Contrast pocket, matching raw edges. Pin. Find the horizontal center of the pockets, and create 2 Main Fabric Pockets by sewing a seam in the center of the Main Fabric piece only. (see photo)

Step 6: Place the other piece of velcro
                Fold the main panel of the cover (the one with the fusible fleece) in half lengthwise, so that the 12 1/2" edges line up. Fold your strap in half lengthwise as well. Open both. Match the center creases, and lay the strap onto the right side of the fabric on the RIGHT HAND EDGE (see photo). With a fabric marking pencil, mark the cover where the end of the strap hits (aka where the velcro is). Fold your second (soft) piece of velcro in half so that it forms a square. Measure 1 1/4 inches to the right of the line you drew, and place your velcro, making sure to line it up with the center crease on the cover. Sew in place.

*Note: I had a hard time describing this step...if it is confusing please let me know and I will try to help. 

Step 6: Place the Kindle "Pocket" onto the interior panel
                 Fold the interior Main Fabric Panel (the one without the fleece) in half, right sides together, so that it measures 12 1/4" X 9 1/4". Finger press the fold to mark the center, so it opens like a book. Open. Now center the Kindle pocket on the right hand side of the crease, on the right side of the fabric. Pin.

                 Stitch the pocket in place, on the straight edges only, not the corners. You want the corner pieces to be a bit free so that you can get the Kindle in and out.

Step 7: Place the other "Pockets" onto the interior panel.
                  Matching Raw edges, place the prepared "pockets" onto the left hand side of the Main Fabric Interior Panel. Pin. Baste around raw edges to hold in place.

Step 8: Putting it all together
                   To place your strap, place the prepared interior panel onto the prepared exterior panel, making sure that the left hand side of the interior panel (with the 3 pockets) is on the same side as the velcro on the exterior (see photo). Fold like a book, with the velcro side of the exterior panel on top. Line up the velcro on the exterior with the velcro of the interior (matching raw edges). CAREFULLY detach the velcro, making sure to keep the raw edges in place. Lay the strap down on the side of the cover, with the raw edges where you had them lined up. Now, you want the strap to lie along the BACK of the exterior panel, so you will pinch the raw edges together, holding the strap in place, but flipping the entire cover (See picture, that's confusing). Pin the strap to the EXTERIOR panel only, but pin it from the WRONG side of the panel.

                    Now, with strap still pinned, flip so that the right sides of the interior and exterior panels are facing, with raw edges matching. Make sure that the side of the exterior panel that has the strap on it is on top of the Interior Panel side with the Kindle Pocket.

                    Stitch around edges, leaving a 6" opening at the bottom for turning (and to insert your peltex panels). Turn & Press.

Step 9: Finishing
                  Insert your peltex panels, 1 at a time, placing one on each side of the "book." Turn the raw edges at the bottom to the inside, and Top Stitch around entire perimeter of Cover.

                  With your fingers, find the gap that is between the two Peltex panels. Sew a seam in between the two...it will help keep them in place as well as help the cover to fold.

                   If you are adding an embellishment on the strap, do it now. Insert your Kindle Fire and make sure that the strap "latches" when the fire is in place. If not, take out the piece of soft Velcro that is on the main body of the cover, re-position, and hand sew in place. You won't be able to sew through the Peltex, but if you take your time you can hook the needle through the fabric and fleece and get it on there...trust me, I had to do it!

That's it, You're done!!!